HELLO! BOOT0 is starting! boot0 version : fel_flag = 0x00000000 rtc[0] value = 0x00000000 rtc[1] value = 0x00000000 rtc[2] value = 0x00000000 rtc[3] value = 0x00000000 rtc[4] value = 0x00000000 rtc[5] value = 0x00000000 rtc[6] value = 0x00000000 rtc[7] value = 0x00000000 DRAM DRIVE INFO: V0.8 DRAM Type = 3 (2:DDR2,3:DDR3,6:LPDDR2,7:LPDDR3) DRAM CLK = 672 MHz DRAM zq value: 003b3bfb READ DQS LCDL = 001c1c1c DRAM SIZE =1024 M odt delay dram size =1024 NAND_PIORequest, nand_index: 0x00001000 Reg 0x01c20848: 0x0004adeb Reg 0x01c2084c: 0x0004adde Reg 0x01c20850: 0x0004adde NAND_ClkRequest, nand_index: 0x0004adf6 Reg 0x01c20080: 0x0004adf3 Reg 0x01c20060: 0x0004ade6 Reg 0x01c202c0: 0x0004ade6 NAND_SetClk, nand_index: 0x0000000a Reg 0x01c20080: 0x0004adf7 _vender_get_param_otp_hynix time 0! rr cnt: 8 rr reg cnt: 4 NB0 : nand phy init ok sum=ba8a6bd7 src_sum=ba8a6bd7 Ready to disable icache. Jump to secend Boot. SUNXI_NORMAL_MODE [ 0.294]e mode U-Boot 2011.09-rc1-dirty (Apr 11 2015 - 10:38:30) Allwinner Technology [ 0.302]version: 1.1.0 normal mode [ 0.309]pmbus: ready not set main pmu id axp_probe error [ 0.346]PMU: pll1 1008 Mhz,PLL6=600 Mhz AXI=336 Mhz,AHB=200 Mhz, APB1=100 Mhz sid read already fel key new mode run key detect no key found no key input dram_para_set start dram_para_set end normal mode [ 0.377]DRAM: 1 GiB relocation Offset is: 35af9000 [box standby] read rtc = 0x0 [box_start_os] mag be start_type no use user_gpio config user_gpio ok gic: normal or no secure os mode workmode = 0 [ 0.453]NAND: NAND_UbootInit NAND_UbootInit start NB1 : enter NAND_LogicInit uboot:physical version: 2 21 20141212 1122 nand : get id_number_ctl fail, 7fb9981b uboot:nand info: a714dead ffff4a42 218c 40704 5 nand : get CapacityLevel fail, 7fb98baa not burn nand partition table! boot_mode 1: nftl num: 3 init nftl: 0 NB1 : NAND_LogicInit ok, result = 0x0 [ 1.143]sunxi flash init ok script config pll_de to 864 Mhz Not Found clk pll_video1 in script script config pll_video to 297 Mhz [boot]disp_init_tv [DISP_TV] disp_init_tv enter g_tv_used screen 0 do not support TV TYPE! [BOOOT_DISP_TV] disp tv device_registered unable to find regulator vcc-hdmi-18 from [pmu1_regu] or [pmu2_regu] enable power vcc-hdmi-18, ret=-1 DRV_DISP_Init end boot_disp.auto_hpd=1 auto hpd check has 0 times! read byte = 0 attched ok, mgr0<-->device0, type=4, mode=4---- ready to set mode [ 2.021]finally, output_type=0x4, output_mode=0x4, screen_id=0x0, disp_para=0x404 In: serial Out: serial Err: serial --------fastboot partitions-------- -total partitions:14- -name- -start- -size- bootloader : 1000000 1000000 env : 2000000 1000000 boot : 3000000 1000000 system : 4000000 30000000 misc : 34000000 1000000 recovery : 35000000 2000000 sysrecovery : 37000000 30000000 private : 67000000 1000000 Reserve0 : 68000000 1000000 klog : 69000000 1000000 Reserve1 : 6a000000 2000000 Reserve2 : 6c000000 1000000 cache : 6d000000 28000000 UDISK : 95000000 0 ----------------------------------- base bootcmd=run setargs_nand boot_normal bootcmd set setargs_nand key 0 cant find rcvy value cant find fstbt value misc partition found to be run cmd=run setargs_nand boot_normal the secure storage map is empty no item name mac in the map sunxi storage read fail no item name wifi_mac in the map sunxi storage read fail no item name bt_mac in the map sunxi storage read fail no item name specialstr in the map sunxi storage read fail no item name serialno in the map sunxi storage read fail the user data'magic is bad WORK_MODE_BOOT adver not need show sunxi_bmp_logo_display f_read btr over hd12896 read byte = 3686454 [ 2.363]screen_id =0, screen_width =1280, screen_height =720 [ 2.369]frame buffer address 46400000 [ 2.373]Hit any key to stop autoboot: 0 read boot or recovery all [ 2.858]sunxi flash read :offset 3000000, 12897048 bytes OK [ 2.867]ready to boot board_display_setenv: disp_para=404 [ 2.872][mmc]: MMC Device 2 not found [ 2.876][mmc]: mmc not find,so not exit NAND_UbootExit NB1 : NAND_LogicExit nand release dma:0 [ 2.880] Starting kernel ... [sun8i_fixup]: From boot, get meminfo: Start: 0x40000000 Size: 1024MB ion_carveout reserve: 160m@0 256m@0 130m@1 200m@1 ion_reserve_common: ion reserve: [0x70000000, 0x80000000]! <6>[ 0.000000] Booting Linux on physical CPU 0 <6>[ 0.000000] Initializing cgroup subsys cpu <5>[ 0.000000] Linux version 3.4.39 (wisdom@ubuntu-server) (gcc version 4.6.3 20120201 (prerelease) (crosstool-NG linaro-1.13.1-2012.02-20120222 - Linaro GCC 2012.02) ) #32 SMP PREEMPT Wed Apr 29 10:21:04 CST 2015 <7>[ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d <7>[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache <7>[ 0.000000] Machine: sun8i <6>[ 0.000000] cma: CMA: reserved 256 MiB at 70000000 <7>[ 0.000000] Memory policy: ECC disabled, Data cache writealloc <7>[ 0.000000] On node 0 totalpages: 262144 <7>[ 0.000000] free_area_init_node: node 0, pgdat c094bec0, node_mem_map c1206000 <7>[ 0.000000] Normal zone: 1404 pages used for memmap <7>[ 0.000000] Normal zone: 0 pages reserved <7>[ 0.000000] Normal zone: 158340 pages, LIFO batch:31 <7>[ 0.000000] HighMem zone: 900 pages used for memmap <7>[ 0.000000] HighMem zone: 101500 pages, LIFO batch:31 <7>[ 0.000000] script_init enter! <7>[ 0.000000] script_init exit! <6>[ 0.000000] PERCPU: Embedded 8 pages/cpu @c1b1c000 s11264 r8192 d13312 u32768 <7>[ 0.000000] pcpu-alloc: s11264 r8192 d13312 u32768 alloc=8*4096 <7>[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 <7>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259840 <5>[ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/block/system init=/init loglevel=4 vmalloc=384M partitions=bootloader@nanda:env@nandb:boot@nandc:system@nandd:misc@nande:recovery@nandf:sysrecovery@nandg:private@nandh:Reserve0@nandi:klog@nandj:Reserve1@nandk:Reserve2@nandl:cache@nandm:UDISK@nandn mac_addr= wifi_mac= bt_mac= specialstr= serialno= boot_type=0 disp_para=404 config_size=35900 <6>[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) <6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) <6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) <6>[ 0.000000] Memory: 1024MB = 1024MB total <5>[ 0.000000] Memory: 762564k/762564k available, 286012k reserved, 147456K highmem <5>[ 0.000000] Virtual kernel memory layout: <5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) <5>[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) <5>[ 0.000000] vmalloc : 0xe7800000 - 0xff000000 ( 376 MB) <5>[ 0.000000] lowmem : 0xc0000000 - 0xe7000000 ( 624 MB) <5>[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) <5>[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) <5>[ 0.000000] .text : 0xc0008000 - 0xc0886b54 (8699 kB) <5>[ 0.000000] .init : 0xc0887000 - 0xc08d6c00 ( 319 kB) <5>[ 0.000000] .data : 0xc08d8000 - 0xc094e860 ( 475 kB) <5>[ 0.000000] .bss : 0xc094f014 - 0xc0b22188 (1869 kB) <6>[ 0.000000] Preemptible hierarchical RCU implementation. <6>[ 0.000000] Additional per-CPU info printed with stalls. <6>[ 0.000000] NR_IRQS:544 <6>[ 0.000000] Architected local timer running at 24.00MHz. <6>[ 0.000000] Switching to timer-based delay loop <6>[ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms <6>[ 0.000000] Console: colour dummy device 80x30 <6>[ 0.000245] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.00 BogoMIPS (lpj=24000000) <6>[ 0.000271] pid_max: default: 32768 minimum: 301 <6>[ 0.000686] Mount-cache hash table entries: 512 <6>[ 0.001762] Initializing cgroup subsys debug <6>[ 0.001778] Initializing cgroup subsys cpuacct <6>[ 0.001790] Initializing cgroup subsys freezer <6>[ 0.001829] CPU: Testing write buffer coherency: ok <6>[ 0.001883] ftrace: allocating 23271 entries in 69 pages <6>[ 0.030277] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 <6>[ 0.030296] [sunxi_smp_prepare_cpus] enter <6>[ 0.030335] Setting up static identity map for 0x405ff838 - 0x405ff890 <7>[ 0.031348] CPU1: Booted secondary processor <6>[ 0.031348] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 <7>[ 0.031483] CPU2: Booted secondary processor <6>[ 0.031483] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 <7>[ 0.031483] CPU3: Booted secondary processor <6>[ 0.031483] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 <6>[ 0.040191] Brought up 4 CPUs <6>[ 0.040210] SMP: Total of 4 processors activated (19200.00 BogoMIPS). <6>[ 0.040807] devtmpfs: initialized <6>[ 0.044973] wakeup src cnt is : 0. <6>[ 0.044983] sunxi pm init <6>[ 0.045420] pinctrl core: initialized pinctrl subsystem <6>[ 0.058159] NET: Registered protocol family 16 <6>[ 0.059151] DMA: preallocated 2048 KiB pool for atomic coherent allocations <6>[ 0.059151] script_sysfs_init success <7>[ 0.059151] sunxi_dump_init success <6>[ 0.059151] gpiochip_add: registered GPIOs 0 to 383 on device: sunxi-pinctrl <6>[ 0.059151] sunxi-pinctrl sunxi-pinctrl: initialized sunXi PIO driver <6>[ 0.060186] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. <6>[ 0.060201] hw-breakpoint: maximum watchpoint size is 8 bytes. <7>[ 0.060477] [sunxi-module]: [sunxi-module.0] probe success <6>[ 0.060517] script config pll_video to 297 Mhz <6>[ 0.060534] script config pll_de to 864 Mhz <6>[ 0.060548] script config pll_ve to 402 Mhz <7>[ 0.060576] sunxi_default_clk_init <7>[ 0.060585] try to set pll6ahb1 to 200000000 <7>[ 0.060605] try to set ahb clk source to pll6ahb1 <7>[ 0.060615] set ahb clk source to pll6ahb1 <7>[ 0.060625] try to set ahb1 to 200000000 <7>[ 0.060637] try to set apb1 to 100000000 <7>[ 0.061291] ===fe3o4==== sunxi_root_procfs_attach ret:0 <6>[ 0.070301] bio: create slab at 0 <5>[ 0.070488] [ARISC] :sunxi-arisc driver v1.04 <5>[ 0.082497] [ARISC] :arisc version: [v0.1.34] <7>[ 0.082518] [sunxi-module]: arisc register success <5>[ 0.153063] [ARISC] :sunxi-arisc driver v1.04 startup succeeded <5>[ 0.160533] SCSI subsystem initialized <6>[ 0.160755] usbcore: registered new interface driver usbfs <6>[ 0.160837] usbcore: registered new interface driver hub <6>[ 0.160873] usbcore: registered new device driver usb <4>[ 0.160873] twi_chan_cfg()335 - [twi0] has no twi_regulator. <4>[ 0.160873] twi_chan_cfg()335 - [twi1] has no twi_regulator. <4>[ 0.160873] twi_chan_cfg()335 - [twi2] has no twi_regulator. <6>[ 0.160873] Linux video capture interface: v2.00 <6>[ 0.161050] Advanced Linux Sound Architecture Driver Version 1.0.25. <6>[ 0.161630] Bluetooth: Core ver 2.16 <6>[ 0.161672] NET: Registered protocol family 31 <6>[ 0.161682] Bluetooth: HCI device and connection manager initialized <6>[ 0.161696] Bluetooth: HCI socket layer initialized <6>[ 0.161708] Bluetooth: L2CAP socket layer initialized <6>[ 0.161747] Bluetooth: SCO socket layer initialized <6>[ 0.161993] cfg80211: Calling CRDA to update world regulatory domain <6>[ 0.162057] Switching to clocksource arch_sys_counter <5>[ 0.177876] FS-Cache: Loaded <6>[ 0.178186] CacheFiles: Loaded <6>[ 0.190417] NET: Registered protocol family 2 <6>[ 0.190715] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) <6>[ 0.191392] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) <6>[ 0.193287] TCP bind hash table entries: 65536 (order: 7, 786432 bytes) <6>[ 0.194213] TCP: Hash tables configured (established 131072 bind 65536) <6>[ 0.194225] TCP: reno registered <6>[ 0.194240] UDP hash table entries: 512 (order: 2, 16384 bytes) <6>[ 0.194277] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) <6>[ 0.194624] NET: Registered protocol family 1 <6>[ 0.195088] RPC: Registered named UNIX socket transport module. <6>[ 0.195101] RPC: Registered udp transport module. <6>[ 0.195111] RPC: Registered tcp transport module. <6>[ 0.195121] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 0.195349] Unpacking initramfs... <6>[ 0.380756] Freeing initrd memory: 2068K <6>[ 0.381296] hw perfevents: enabled with ARMv7 Cortex_A7 PMU driver, 5 counters available <6>[ 0.381426] sunxi_reg_init enter <6>[ 0.382357] audit: initializing netlink socket (disabled) <5>[ 0.382411] type=2000 audit(0.380:1): initialized <7>[ 0.383606] highmem bounce pool size: 64 pages <6>[ 0.385752] NTFS driver 2.1.30 [Flags: R/W]. <6>[ 0.385964] fuse init (API version 7.18) <6>[ 0.386501] msgmni has been set to 1205 <6>[ 0.387553] io scheduler noop registered <6>[ 0.387566] io scheduler deadline registered <6>[ 0.387680] io scheduler cfq registered (default) <6>[ 0.388036] [DISP]disp_module_init <6>[ 0.388366] cmdline,disp=404 <6>[ 0.423715] [DISP]disp_module_init finish <4>[ 0.423941] sw_uart_get_devinfo()1503 - uart0 has no uart_regulator. <4>[ 0.423958] sw_uart_get_devinfo()1503 - uart1 has no uart_regulator. <6>[ 0.424366] uart0: ttyS0 at MMIO 0x1c28000 (irq = 32) is a SUNXI <4>[ 0.424381] sw_uart_pm()890 - uart0 clk is already enable <4>[ 0.424401] sw_console_setup()1233 - console setup baud 115200 parity n bits 8, flow n <6>[ 0.424542] console [ttyS0] enabled <6>[ 0.424931] uart1: ttyS1 at MMIO 0x1c28400 (irq = 33) is a SUNXI <7>[ 0.425487] sunxi_cmatest_init enter <7>[ 0.425528] sunxi_cmatest_init success <6>[ 0.425694] sunxi_di_init get di_by_pass err! <6>[ 0.430609] loop: module loaded <4>[ 0.430841] sunxi_spi_chan_cfg()1355 - [spi-0] has no spi_regulator. <4>[ 0.430856] sunxi_spi_chan_cfg()1355 - [spi-1] has no spi_regulator. <6>[ 0.430893] tun: Universal TUN/TAP device driver, 1.6 <6>[ 0.430903] tun: (C) 1999-2004 Max Krasnyansky <6>[ 0.431858] PPP generic driver version 2.4.2 <6>[ 0.432058] PPP BSD Compression module registered <6>[ 0.432072] PPP Deflate Compression module registered <6>[ 0.432874] PPP MPPE Compression module registered <6>[ 0.432890] NET: Registered protocol family 24 <6>[ 0.432930] PPTP driver version 0.8.5 <6>[ 0.433225] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver <6>[ 0.453317] sunxi-ehci sunxi-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver <6>[ 0.453355] sunxi-ehci sunxi-ehci.1: new USB bus registered, assigned bus number 1 <6>[ 0.453970] sunxi-ehci sunxi-ehci.1: irq 104, io mem 0xf1c1a000 <6>[ 0.470040] sunxi-ehci sunxi-ehci.1: USB 0.0 started, EHCI 1.00 <6>[ 0.470732] hub 1-0:1.0: USB hub found <6>[ 0.470761] hub 1-0:1.0: 1 port detected <6>[ 0.491181] sunxi-ehci sunxi-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver <6>[ 0.491213] sunxi-ehci sunxi-ehci.2: new USB bus registered, assigned bus number 2 <6>[ 0.491731] sunxi-ehci sunxi-ehci.2: irq 106, io mem 0xf1c1b000 <6>[ 0.510035] sunxi-ehci sunxi-ehci.2: USB 0.0 started, EHCI 1.00 <7>[ 0.510055] ehci_irq: highspeed device connect <6>[ 0.510638] hub 2-0:1.0: USB hub found <6>[ 0.510660] hub 2-0:1.0: 1 port detected <6>[ 0.531075] sunxi-ehci sunxi-ehci.4: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver <6>[ 0.531105] sunxi-ehci sunxi-ehci.4: new USB bus registered, assigned bus number 3 <6>[ 0.531617] sunxi-ehci sunxi-ehci.4: irq 110, io mem 0xf1c1d000 <6>[ 0.550035] sunxi-ehci sunxi-ehci.4: USB 0.0 started, EHCI 1.00 <6>[ 0.550645] hub 3-0:1.0: USB hub found <6>[ 0.550666] hub 3-0:1.0: 1 port detected <6>[ 0.551069] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver <6>[ 0.571135] sunxi-ohci sunxi-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver <6>[ 0.571171] sunxi-ohci sunxi-ohci.1: new USB bus registered, assigned bus number 4 <6>[ 0.571214] sunxi-ohci sunxi-ohci.1: irq 105, io mem 0xf1c1a400 <6>[ 0.634615] hub 4-0:1.0: USB hub found <6>[ 0.634638] hub 4-0:1.0: 1 port detected <6>[ 0.655070] sunxi-ohci sunxi-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver <6>[ 0.655100] sunxi-ohci sunxi-ohci.2: new USB bus registered, assigned bus number 5 <6>[ 0.655138] sunxi-ohci sunxi-ohci.2: irq 107, io mem 0xf1c1b400 <6>[ 0.714664] hub 5-0:1.0: USB hub found <6>[ 0.714685] hub 5-0:1.0: 1 port detected <6>[ 0.735079] sunxi-ohci sunxi-ohci.4: SW USB2.0 'Open' Host Controller (OHCI) Driver <6>[ 0.735109] sunxi-ohci sunxi-ohci.4: new USB bus registered, assigned bus number 6 <6>[ 0.735145] sunxi-ohci sunxi-ohci.4: irq 111, io mem 0xf1c1d400 <7>[ 0.780096] ehci_irq: highspeed device connect <6>[ 0.794561] hub 6-0:1.0: USB hub found <6>[ 0.794592] hub 6-0:1.0: 1 port detected <6>[ 0.794977] Initializing USB Mass Storage driver... <6>[ 0.795180] usbcore: registered new interface driver usb-storage <6>[ 0.795191] USB Mass Storage support registered. <6>[ 0.795261] usbcore: registered new interface driver ums-alauda <6>[ 0.795316] usbcore: registered new interface driver ums-cypress <6>[ 0.795371] usbcore: registered new interface driver ums-datafab <6>[ 0.795422] usbcore: registered new interface driver ums_eneub6250 <6>[ 0.795474] usbcore: registered new interface driver ums-freecom <6>[ 0.795526] usbcore: registered new interface driver ums-isd200 <6>[ 0.795580] usbcore: registered new interface driver ums-jumpshot <6>[ 0.795634] usbcore: registered new interface driver ums-karma <6>[ 0.795685] usbcore: registered new interface driver ums-onetouch <6>[ 0.795758] usbcore: registered new interface driver ums-realtek <6>[ 0.795814] usbcore: registered new interface driver ums-sddr09 <6>[ 0.795867] usbcore: registered new interface driver ums-sddr55 <6>[ 0.795920] usbcore: registered new interface driver ums-usbat <6>[ 0.796068] usbcore: registered new interface driver usbserial <6>[ 0.796082] usbserial: USB Serial Driver core <6>[ 0.796144] usbcore: registered new interface driver option <6>[ 0.796188] USB Serial support registered for GSM modem (1-port) <6>[ 0.796805] file system registered <6>[ 0.798617] android_usb gadget: Mass Storage Function, version: 2009/09/11 <6>[ 0.798632] android_usb gadget: Number of LUNs=3 <6>[ 0.798645] lun0: LUN: removable file: (no medium) <6>[ 0.798656] lun1: LUN: removable file: (no medium) <6>[ 0.798667] lun2: LUN: removable file: (no medium) <6>[ 0.799032] android_usb gadget: android_usb ready <7>[ 0.799191] uinput result 0 , vmouse_init <6>[ 0.799878] mousedev: PS/2 mouse device common for all mice <3>[ 0.800187] ls_fetch_sysconfig_para: type err device_used = -1064128484. <5>[ 0.807822] =========script_get_err============ <7>[ 0.807831] ltr_init: ls_fetch_sysconfig_para err. <6>[ 0.808417] sunxi-rtc sunxi-rtc: rtc core: registered sunxi-rtc as rtc0 <6>[ 0.808572] IR RC5(x) protocol handler initialized <7>[ 0.808686] sunxi cedar version 0.1 <7>[ 0.808739] [cedar]: install start!!! <7>[ 0.808958] [cedar]: install end!!! <6>[ 0.808995] sunxi_wdt_init_module: sunxi WatchDog Timer Driver v1.0 <6>[ 0.809178] sunxi_wdt_probe: devm_ioremap return wdt_reg 0xf1c20ca0, res->start 0x01c20ca0, res->end 0x01c20cbf <6>[ 0.809339] sunxi_wdt_probe: initialized (g_timeout=16s, g_nowayout=0) <6>[ 0.809353] wdt_enable, write reg 0xf1c20cb8 val 0x00000000 <6>[ 0.809365] timeout_to_interv, line 167 <6>[ 0.809374] interv_to_timeout, line 189 <6>[ 0.809385] wdt_set_tmout, write 0x000000b0 to mode reg 0xf1c20cb8, actual timeout 16 sec <6>[ 0.809915] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com <6>[ 0.809986] Bluetooth: HCI UART driver ver 2.2 <3>[ 0.810367] [cpu_freq] ERR:get cpu extremity frequency from sysconfig failed, use max_freq <7>[ 0.822388] [mmc]: SD/MMC/SDIO Host Controller Driver(v1.109 2014-12-4 20:51) Compiled in Mar 21 2015 at 11:33:55 <7>[ 0.822422] [mmc]: get mmc0's sdc_power is null! <7>[ 0.822448] [mmc]: get mmc1's sdc_power is null! <7>[ 0.822458] [mmc]: get mmc1's 2xmode ok, val = 1 <7>[ 0.822467] [mmc]: get mmc1's ddrmode ok, val = 1 <7>[ 0.822483] [mmc]: MMC host used card: 0x3, boot card: 0x0, io_card 2 <7>[ 0.823438] [mmc]: sdc0 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B <7>[ 0.826783] [mmc]: sdc1 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B <6>[ 0.830073] usb 2-1: new high-speed USB device number 2 using sunxi-ehci <6>[ 0.830990] usbcore: registered new interface driver usbhid <6>[ 0.830999] usbhid: USB HID core driver <6>[ 0.831519] ashmem: initialized <6>[ 0.831638] logger: created 256K log 'log_main' <6>[ 0.831761] logger: created 256K log 'log_events' <6>[ 0.831878] logger: created 256K log 'log_radio' <6>[ 0.831999] logger: created 256K log 'log_system' <3>[ 0.832286] sunxi_oops: heming add OOPS_INFO_ADDR = -20 <6>[ 0.842292] asoc: sndcodec <-> sunxi-codec mapping ok <6>[ 0.845656] asoc: sndhdmi <-> sunxi-hdmiaudio.0 mapping ok <6>[ 0.846480] u32 classifier <6>[ 0.846490] Actions configured <6>[ 0.846499] Netfilter messages via NETLINK v0.30. <6>[ 0.846578] nf_conntrack version 0.5.0 (16043 buckets, 64172 max) <6>[ 0.847015] ctnetlink v0.93: registering with nfnetlink. <6>[ 0.847069] NF_TPROXY: Transparent proxy support initialized, version 4.1.0 <6>[ 0.847078] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd. <6>[ 0.847370] xt_time: kernel timezone is -0000 <6>[ 0.847525] IPv4 over IPv4 tunneling driver <6>[ 0.848002] gre: GRE over IPv4 demultiplexor driver <6>[ 0.848013] ip_gre: GRE over IPv4 tunneling driver <6>[ 0.848683] ip_tables: (C) 2000-2006 Netfilter Core Team <6>[ 0.848894] arp_tables: (C) 2002 David S. Miller <6>[ 0.848960] TCP: cubic registered <6>[ 0.848969] Initializing XFRM netlink socket <6>[ 0.849284] NET: Registered protocol family 10 <6>[ 0.850521] Mobile IPv6 <6>[ 0.850560] ip6_tables: (C) 2000-2006 Netfilter Core Team <6>[ 0.850744] IPv6 over IPv4 tunneling driver <6>[ 0.851839] NET: Registered protocol family 17 <6>[ 0.851874] NET: Registered protocol family 15 <6>[ 0.852044] Bluetooth: RFCOMM TTY layer initialized <6>[ 0.852064] Bluetooth: RFCOMM socket layer initialized <6>[ 0.852073] Bluetooth: RFCOMM ver 1.11 <6>[ 0.852082] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 <6>[ 0.852091] Bluetooth: BNEP filters: protocol multicast <6>[ 0.852101] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 <6>[ 0.852211] L2TP core driver, V2.0 <6>[ 0.852234] PPPoL2TP kernel driver, V2.0 <6>[ 0.852242] L2TP IP encapsulation support (L2TPv3) <6>[ 0.852325] L2TP netlink interface <6>[ 0.852356] L2TP ethernet pseudowire support (L2TPv3) <6>[ 0.852738] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 <6>[ 0.852761] ThumbEE CPU extension supported. <5>[ 0.852782] Registering SWP/SWPB emulation handler <6>[ 0.852806] sunxi_bootup_extend_init: bootup extend state 1 <6>[ 0.853645] cmdline,disp=404 <7>[ 0.853761] [HDMI] power vcc-hdmi-18 <6>[ 0.981281] hub 2-1:1.0: USB hub found <6>[ 0.981401] hub 2-1:1.0: 4 ports detected <6>[ 1.260050] usb 1-1: new high-speed USB device number 2 using sunxi-ehci <4>[ 1.366868] [DISP] disp_hdmi_set_detect,line:404:hdmi0's mgr is NULL <4>[ 1.367020] [DISP] disp_device_attached,line:94:attched ok, mgr0<-->device0, type=4 <6>[ 1.367823] cmdline,disp=404 <4>[ 1.367962] [DISP] disp_init_tv,line:531:screen 0 do not support TV TYPE! <4>[ 1.367980] [DISP] bsp_disp_tv_register,line:938:'ptv is null <7>[ 1.367992] tv registered!! <6>[ 1.368294] sunxi-rtc sunxi-rtc: setting system clock to 1970-01-01 00:00:04 UTC (4) <3>[ 1.368313] ths_fetch_sysconfig_para: type err device_used = 1. <6>[ 1.376388] CPU Budget:Register notifier <6>[ 1.376400] CPU Budget:register Success <6>[ 1.376411] sunxi-budget-cooling sunxi-budget-cooling: Cooling device registered: thermal-budget-0 <7>[ 1.379928] [rf_pm]: select module num is 1 <7>[ 1.379941] [rf_pm]: failed to fetch module_power0 <7>[ 1.379951] [rf_pm]: mod has no chip_en gpio <7>[ 1.379959] [rf_pm]: failed to fetch lpo_use_apclk <7>[ 1.379967] [rf_pm]: regulator on. <7>[ 1.380271] [wifi_pm]: wifi gpio init is OK !! <6>[ 1.380323] ALSA device list: <6>[ 1.380331] #0: audiocodec <6>[ 1.380339] #1: sndhdmi <6>[ 1.380841] Freeing init memory: 316K <3>[ 1.385753] init: /init.sun8i.rc: 707: ignored duplicate definition of service 'dhcpcd_bt-pan' <3>[ 1.395368] init: /init.sun8i.rc: 712: ignored duplicate definition of service 'iprenew_bt-pan' <4>[ 1.405405] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead. <6>[ 1.412997] scsi0 : usb-storage 1-1:1.0 <3>[ 1.466705] init: /dev/hw_random not found <3>[ 1.471618] init: defined DONT_SHOW_INITLOGO <7>[ 1.489229] [NAND]nand init start, nand0_used_flag is 1 <7>[ 1.489271] kernel:physical version: 2 21 20141212 1122 <7>[ 1.492030] NAND_ReadPhyArch: get old physic arch ok, use old cfg, now:0x2 0x2188 - old:0x2 0x218c! <7>[ 1.492046] kernel:nand info: a714dead ffff4a42 218c 40704 5 <6>[ 1.670163] usb 2-1.2: new low-speed USB device number 3 using sunxi-ehci <6>[ 1.810178] generic-usb 0003:1C4F:0048.0001: input,hidraw0: USB HID v1.10 Mouse [SIGMACHIP Usb Mouse] on usb-sunxi-ehci-1.2/input0 <6>[ 1.910212] usb 2-1.3: new low-speed USB device number 4 using sunxi-ehci <6>[ 2.050370] generic-usb 0003:0603:0002.0002: input,hidraw1: USB HID v1.10 Keyboard [SINO WEALTH USB Composite Device] on usb-sunxi-ehci-1.3/input0 <6>[ 2.100142] nanda: <6>[ 2.102302] nandb: unknown partition table <6>[ 2.104410] nandc: unknown partition table <6>[ 2.106453] nandd: unknown partition table <6>[ 2.108433] nande: unknown partition table <6>[ 2.110434] nandf: unknown partition table <6>[ 2.112442] nandg: unknown partition table <6>[ 2.114485] nandh: <6>[ 2.116509] nandi: <6>[ 2.118510] nandj: unknown partition table <6>[ 2.131046] generic-usb 0003:0603:0002.0003: input,hiddev0,hidraw2: USB HID v1.10 Mouse [SINO WEALTH USB Composite Device] on usb-sunxi-ehci-1.3/input1 <7>[ 2.157732] [ND]something strange 550,556!! <6>[ 2.210238] usb 2-1.4: new high-speed USB device number 5 using sunxi-ehci <6>[ 2.322640] scsi1 : usb-storage 2-1.4:1.0 <5>[ 2.452609] scsi 0:0:0:0: Direct-Access Samsung S2 Portable PQ: 0 ANSI: 2 CCS <5>[ 2.453925] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) <5>[ 2.454788] sd 0:0:0:0: [sda] Write Protect is off <7>[ 2.454801] sd 0:0:0:0: [sda] Mode Sense: 28 00 00 00 <3>[ 2.455662] sd 0:0:0:0: [sda] No Caching mode page present <3>[ 2.461803] sd 0:0:0:0: [sda] Assuming drive cache: write through <3>[ 2.471165] sd 0:0:0:0: [sda] No Caching mode page present <3>[ 2.477249] sd 0:0:0:0: [sda] Assuming drive cache: write through <6>[ 2.512439] sda: sda1 sda2 <3>[ 2.515673] sd 0:0:0:0: [sda] No Caching mode page present <3>[ 2.521779] sd 0:0:0:0: [sda] Assuming drive cache: write through <5>[ 2.528539] sd 0:0:0:0: [sda] Attached SCSI disk <5>[ 3.321591] scsi 1:0:0:0: Direct-Access Multiple Card Reader 1.00 PQ: 0 ANSI: 0 <5>[ 3.767310] sd 1:0:0:0: [sdb] 61405184 512-byte logical blocks: (31.4 GB/29.2 GiB) <5>[ 3.768170] sd 1:0:0:0: [sdb] Write Protect is off <7>[ 3.768184] sd 1:0:0:0: [sdb] Mode Sense: 03 00 00 00 <3>[ 3.769048] sd 1:0:0:0: [sdb] No Caching mode page present <3>[ 3.775273] sd 1:0:0:0: [sdb] Assuming drive cache: write through <3>[ 3.785672] sd 1:0:0:0: [sdb] No Caching mode page present <3>[ 3.791781] sd 1:0:0:0: [sdb] Assuming drive cache: write through <6>[ 3.800816] sdb: sdb1 <3>[ 3.803797] sd 1:0:0:0: [sdb] No Caching mode page present <3>[ 3.809882] sd 1:0:0:0: [sdb] Assuming drive cache: write through <5>[ 3.816664] sd 1:0:0:0: [sdb] Attached SCSI removable disk <6>[ 3.821152] usb 2-1.2: USB disconnect, device number 3 <7>[ 3.880439] [ND]cross_talk_rebuild_current_block!! 49,21,556,50,21,557! <7>[ 3.880452] [ND]corss talk rebuild 2 21 21 21! <7>[ 3.880459] [NE]erase_block block 50! <6>[ 4.380151] usb 2-1.2: new low-speed USB device number 6 using sunxi-ehci <7>[ 4.494925] PHY_VirtualPageWrite: nDieNum: 0/1 nBlkNum: 306/1024 nPage: 255/256 <7>[ 4.494935] 0xff 0x55 0x55 0x55 0x55 0x0 0xe 0xff 0xff 0xff 0xff 0x0 0x40 0x0 0x83 0xe6 <6>[ 4.519466] generic-usb 0003:1C4F:0048.0004: input,hidraw0: USB HID v1.10 Mouse [SIGMACHIP Usb Mouse] on usb-sunxi-ehci-1.2/input0 <7>[ 4.549324] [NE]erase_block block 49! <7>[ 5.159137] PHY_VirtualPageWrite: nDieNum: 0/1 nBlkNum: 305/1024 nPage: 255/256 <7>[ 5.159147] 0xff 0x55 0x55 0x55 0x55 0x0 0xc 0xff 0xff 0xff 0xff 0x0 0x40 0x0 0x83 0xe6 <6>[ 5.297980] nandk: unknown partition table <6>[ 5.298894] nandl: unknown partition table <6>[ 5.300925] nandm: unknown partition table <7>[ 5.436380] PHY_PageRead: ecc limit, 0xa, 0x0, 0x0, 0x0 <7>[ 5.436392] bank 0 block 0x313,page 0xff <7>[ 5.436401] secbitmap low: 0xffffffff, high 0xffffffff <7>[ 5.438203] PHY_PageRead: ecc limit, 0x0, 0xa, 0x0, 0x0 <7>[ 5.438214] bank 0 block 0x3d7,page 0xff <7>[ 5.438222] secbitmap low: 0xffffffff, high 0xffffffff <7>[ 5.439437] PHY_PageRead: ecc limit, 0xa, 0xa, 0x0, 0x0 <7>[ 5.439447] bank 0 block 0x3fe,page 0xff <7>[ 5.439455] secbitmap low: 0xffffffff, high 0xffffffff <7>[ 5.450249] PHY_PageRead: ecc limit, 0xa, 0x0, 0x0, 0x0 <7>[ 5.450259] bank 0 block 0x2c7,page 0xff <7>[ 5.450268] secbitmap low: 0xffffffff, high 0xffffffff <7>[ 5.479594] PHY_PageRead: ecc limit, 0xa, 0xa, 0x0, 0x0 <7>[ 5.479605] bank 0 block 0x339,page 0xff <7>[ 5.479613] secbitmap low: 0xffffffff, high 0xffffffff <7>[ 5.506525] PHY_PageRead: ecc limit, 0xa, 0x0, 0x0, 0x0 <7>[ 5.506535] bank 0 block 0x27f,page 0xff <7>[ 5.506544] secbitmap low: 0xffffffff, high 0xffffffff <7>[ 5.534014] PHY_PageRead: ecc limit, 0x0, 0xa, 0x0, 0x0 <7>[ 5.534025] bank 0 block 0x1de,page 0xff <7>[ 5.534033] secbitmap low: 0xffffffff, high 0xffffffff <7>[ 5.555584] PHY_PageRead: ecc limit, 0x0, 0xa, 0x0, 0x0 <7>[ 5.555595] bank 0 block 0x25c,page 0xff <7>[ 5.555603] secbitmap low: 0xffffffff, high 0xffffffff <7>[ 5.574187] PHY_PageRead: ecc limit, 0x0, 0xa, 0x0, 0x0 <7>[ 5.574197] bank 0 block 0x224,page 0xff <7>[ 5.574206] secbitmap low: 0xffffffff, high 0xffffffff <7>[ 5.589319] PHY_PageRead: ecc limit, 0x0, 0xa, 0x0, 0x0 <7>[ 5.589329] bank 0 block 0x2f4,page 0xff <7>[ 5.589337] secbitmap low: 0xffffffff, high 0xffffffff <7>[ 5.614083] PHY_PageRead: ecc limit, 0xa, 0xa, 0x0, 0x0 <7>[ 5.614093] bank 0 block 0x311,page 0xff <7>[ 5.614101] secbitmap low: 0xffffffff, high 0xffffffff <7>[ 5.693729] PHY_PageRead: ecc limit, 0xa, 0x0, 0x0, 0x0 <7>[ 5.693741] bank 0 block 0x1e7,page 0xff <7>[ 5.693749] secbitmap low: 0xffffffff, high 0xffffffff <7>[ 5.767847] PHY_PageRead: ecc limit, 0xa, 0x0, 0x0, 0x0 <7>[ 5.767858] bank 0 block 0x2e5,page 0xff <7>[ 5.767866] secbitmap low: 0xffffffff, high 0xffffffff <7>[ 5.773304] PHY_PageRead: ecc limit, 0xa, 0x0, 0x0, 0x0 <7>[ 5.773314] bank 0 block 0x1c7,page 0xff <7>[ 5.773322] secbitmap low: 0xffffffff, high 0xffffffff <7>[ 5.800312] PHY_PageRead: ecc limit, 0x0, 0xa, 0x0, 0x0 <7>[ 5.800322] bank 0 block 0x24b,page 0xff <7>[ 5.800331] secbitmap low: 0xffffffff, high 0xffffffff <7>[ 5.814361] PHY_PageRead: ecc limit, 0x0, 0xa, 0x0, 0x0 <7>[ 5.814371] bank 0 block 0x3d8,page 0xff <7>[ 5.814379] secbitmap low: 0xffffffff, high 0xffffffff <7>[ 5.838903] PHY_PageRead: ecc limit, 0xa, 0x0, 0x0, 0x0 <7>[ 5.838913] bank 0 block 0x3ed,page 0xff <7>[ 5.838922] secbitmap low: 0xffffffff, high 0xffffffff <7>[ 5.881479] PHY_PageRead: ecc limit, 0xa, 0x0, 0x0, 0x0 <7>[ 5.881490] bank 0 block 0x2cb,page 0xff <7>[ 5.881498] secbitmap low: 0xffffffff, high 0xffffffff <7>[ 5.909102] PHY_PageRead: ecc limit, 0xa, 0x0, 0x0, 0x0 <7>[ 5.909113] bank 0 block 0x31b,page 0xff <7>[ 5.909121] secbitmap low: 0xffffffff, high 0xffffffff <7>[ 5.937697] PHY_PageRead: ecc limit, 0xa, 0x0, 0x0, 0x0 <7>[ 5.937707] bank 0 block 0x2ba,page 0xff <7>[ 5.937715] secbitmap low: 0xffffffff, high 0xffffffff <7>[ 6.623241] [ND]cross_talk_rebuild_current_block!! 540,253,122376,327,253,122377! <7>[ 6.623256] [ND]corss talk rebuild 2 253 253 253! <7>[ 6.623264] [NE]erase_block block 327! <6>[ 6.638152] usb 2-1.2: USB disconnect, device number 6 <6>[ 7.110151] usb 2-1.2: new low-speed USB device number 7 using sunxi-ehci <7>[ 7.244948] PHY_VirtualPageWrite: nDieNum: 0/1 nBlkNum: 694/1024 nPage: 255/256 <7>[ 7.244958] 0xff 0x55 0x55 0x55 0x55 0x0 0x6d 0xff 0xff 0xff 0xff 0x1 0x40 0x0 0x83 0xe6 <6>[ 7.249391] generic-usb 0003:1C4F:0048.0005: input,hidraw0: USB HID v1.10 Mouse [SIGMACHIP Usb Mouse] on usb-sunxi-ehci-1.2/input0 <7>[ 7.856193] [NE]erase_block block 540! <7>[ 8.464506] PHY_VirtualPageWrite: nDieNum: 0/1 nBlkNum: 907/1024 nPage: 255/256 <7>[ 8.464517] 0xff 0x55 0x55 0x55 0x55 0x0 0xf4 0xff 0xff 0xff 0xff 0x2 0x40 0x0 0x83 0xe6 <6>[ 9.197789] usb 2-1.2: USB disconnect, device number 7 <6>[ 9.670225] usb 2-1.2: new low-speed USB device number 8 using sunxi-ehci <6>[ 9.809333] generic-usb 0003:1C4F:0048.0006: input,hidraw0: USB HID v1.10 Mouse [SIGMACHIP Usb Mouse] on usb-sunxi-ehci-1.2/input0 <6>[ 9.945107] nandn: unknown partition table <7>[ 9.945372] [NAND]nand init end <3>[ 10.081984] init: start e2fsck listening... <6>[ 10.091644] EXT4-fs (nandd): mounted filesystem with ordered data mode. Opts: (null) <6>[ 10.110987] EXT4-fs (nandm): recovery complete <6>[ 10.112270] EXT4-fs (nandm): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro <6>[ 10.190104] fs_mgr: Running /system/bin/e2fsck on /dev/block/by-name/cache <7>[ 10.245207] e2fsck->main: e2fsck start... <7>[ 10.245250] e2fsck->pipe_write: pipe_write type=1 <6>[ 10.260718] e2fsck: e2fsck 1.41.14 (22-Dec-2010) <6>[ 10.260778] e2fsck: /dev/block/by-name/cache: clean, 13/40960 files, 5258/163840 blocks <6>[ 10.262239] EXT4-fs (nandm): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,barrier=1 <7>[ 10.730502] EXT4-fs (nandn): ext4_orphan_cleanup: deleting unreferenced inode 16733 <7>[ 10.730840] EXT4-fs (nandn): ext4_orphan_cleanup: deleting unreferenced inode 16672 <6>[ 10.731005] EXT4-fs (nandn): 2 orphan inodes deleted <6>[ 10.731015] EXT4-fs (nandn): recovery complete <6>[ 10.738438] EXT4-fs (nandn): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro <6>[ 10.860083] fs_mgr: Running /system/bin/e2fsck on /dev/block/by-name/UDISK <7>[ 10.864370] e2fsck->main: e2fsck start... <7>[ 10.864411] e2fsck->pipe_write: pipe_write type=1 <6>[ 10.882815] e2fsck: e2fsck 1.41.14 (22-Dec-2010) <6>[ 10.882855] e2fsck: /dev/block/by-name/UDISK: clean, 9022/303104 files, 227390/1210368 blocks <6>[ 10.885382] EXT4-fs (nandn): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,barrier=1,noauto_da_alloc <3>[ 10.972589] init: dont need format /dev/block/by-name/private <3>[ 11.086605] init: C_IN_START <3>[ 11.089822] init: path = /dev/block/by-name/cache <3>[ 11.095117] init: C_IN_START <3>[ 11.098327] init: path = /dev/block/by-name/UDISK <3>[ 11.145252] Failed to get mali parameter! <6>[ 11.150237] Init Mali gpu successfully <7>[ 11.151402] Mali: Mali device driver loaded <5>[ 11.184487] [VFE]cci probe start cci_sel = 0! <5>[ 11.184533] [VFE]cci probe end cci_sel = 0! <5>[ 11.184615] [VFE]cci_init end <5>[ 11.273922] [VFE]Welcome to Video Front End driver <5>[ 11.274229] [VFE]pdev->id = 0 <5>[ 11.274239] [VFE]dev->mipi_sel = 0 <5>[ 11.274246] [VFE]dev->vip_sel = 0 <5>[ 11.274254] [VFE]dev->isp_sel = 0 <4>[ 11.280064] [VFE_WARN]vfe vpu clock is null <5>[ 11.287469] [VFE]..........................vfe clk open!....................... <7>[ 11.287497] [ISP] isp platform_id = 5! <5>[ 11.287619] [VFE]vfe_init end <5>[ 11.290095] [VFE]probe_work_handle start! <5>[ 11.290114] [VFE]v4l2 subdev register input_num = 0 <5>[ 11.290124] [VFE]vfe sensor detect start! input_num = 0 <5>[ 11.290137] [VFE]Find sensor name is "gc2035", i2c address is 78, type is "YUV" ! <5>[ 11.290147] [VFE]Sub device register "gc2035" i2c_addr = 0x78 start! <5>[ 11.290160] [VFE]v4l2_device_register_subdev return 0 <5>[ 11.290169] [VFE]registered sensor subdev is OK! <5>[ 11.290176] [VFE]Check sensor! <5>[ 11.302247] [VFE]mclk on <6>[ 11.340278] usbcore: registered new interface driver uvcvideo <6>[ 11.340291] USB Video Class driver (v1.1.1) <7>[ 11.357828] [CSI][GC2035]V4L2_IDENT_SENSOR=2035 <6>[ 11.389439] asoc: sndspdif <-> spdif0 mapping ok <7>[ 11.405406] gpio_pin_1(362) gpio_request <7>[ 11.405612] gpio_pin_2(15) gpio_request <7>[ 11.405804] gpio name is PL10, ret = 0 <7>[ 11.405984] gpio name is PA15, ret = 0 <7>[ 11.406158] gpio_init finish with uesd 1! <6>[ 11.495350] usbcore: registered new interface driver snd-usb-audio <3>[ 11.532621] init: /dev/hw_random not found <6>[ 11.556363] rtk_btusb: Realtek Bluetooth USB driver ver 1.0.20130524 <7>[ 11.556377] Registering file operations for btfcd driver <7>[ 11.556634] Class driver initialized successfully <6>[ 11.556763] usbcore: registered new interface driver rtk_btusb <6>[ 11.556958] rtk_btusb: btfcd open <6>[ 11.556963] <3>[ 11.556971] rtk_btusb: hci_dev_get Ghdev==NULL <6>[ 11.561954] rtk_btusb: btfcd open <6>[ 11.561959] <3>[ 11.561966] rtk_btusb: hci_dev_get Ghdev==NULL <6>[ 11.566915] rtk_btusb: btfcd open <6>[ 11.566919] <3>[ 11.566925] rtk_btusb: hci_dev_get Ghdev==NULL <6>[ 11.571882] rtk_btusb: btfcd open <6>[ 11.571886] <3>[ 11.571892] rtk_btusb: hci_dev_get Ghdev==NULL <3>[ 11.583507] healthd: Could not open /sys/class/power_supply <3>[ 11.585672] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery' <3>[ 11.599045] healthd: No charger supplies found <4>[ 11.604023] healthd: BatteryStatusPath not found <4>[ 11.604036] healthd: BatteryHealthPath not found <4>[ 11.604047] healthd: BatteryPresentPath not found <4>[ 11.604057] healthd: BatteryCapacityPath not found <4>[ 11.604067] healthd: BatteryVoltagePath not found <4>[ 11.604077] healthd: BatteryTemperaturePath not found <4>[ 11.604088] healthd: BatteryTechnologyPath not found <6>[ 11.604136] binder: 120:120 transaction failed 29189, size 0-0 <3>[ 11.661921] android_usb: already disabled <3>[ 11.666595] init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead <3>[ 11.677736] init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead <6>[ 11.679630] adb_open <6>[ 11.679643] mtp_bind_config <7>[ 11.679661] ep_matches, wrn: endpoint already claimed, ep(0xc092a334, 0xe61e4000, ep1in-bulk) <7>[ 11.679672] ep_matches, wrn: endpoint already claimed, ep(0xc092a334, 0xe61e4000, ep1in-bulk) <7>[ 11.679682] ep_matches, wrn: endpoint already claimed, ep(0xc092a380, 0xe61e4000, ep1out-bulk) <7>[ 11.679691] gadget_is_softwinner_otg is not -int <7>[ 11.679697] gadget_is_softwinner_otg is not -int <6>[ 11.679745] adb_bind_config <7>[ 11.679757] ep_matches, wrn: endpoint already claimed, ep(0xc092a334, 0xe61e4000, ep1in-bulk) <7>[ 11.679767] ep_matches, wrn: endpoint already claimed, ep(0xc092a380, 0xe61e4000, ep1out-bulk) <7>[ 11.679778] ep_matches, wrn: endpoint already claimed, ep(0xc092a334, 0xe61e4000, ep1in-bulk) <7>[ 11.679788] ep_matches, wrn: endpoint already claimed, ep(0xc092a380, 0xe61e4000, ep1out-bulk) <7>[ 11.679797] ep_matches, wrn: endpoint already claimed, ep(0xc092a3cc, 0xe61e3f00, ep2in-bulk) <6>[ 11.757794] usb 2-1.2: USB disconnect, device number 8 <7>[ 11.770060] [CSI][GC2035]disalbe oe! <5>[ 11.783491] [VFE]mclk off <5>[ 11.795599] [VFE]Sub device register "gc2035" is OK! <5>[ 11.795885] [VFE]V4L2 device registered as video0 <5>[ 11.795917] [VFE]register_early_suspend @ probe handle! <5>[ 11.795927] [VFE]..........................vfe clk close!....................... <5>[ 11.795949] [VFE]probe_work_handle end! <6>[ 12.180394] usb 2-1.2: new low-speed USB device number 9 using sunxi-ehci <6>[ 12.320860] generic-usb 0003:1C4F:0048.0007: input,hidraw0: USB HID v1.10 Mouse [SIGMACHIP Usb Mouse] on usb-sunxi-ehci-1.2/input0 <6>[ 14.317920] usb 2-1.2: USB disconnect, device number 9 <6>[ 14.770393] usb 2-1.2: new low-speed USB device number 10 using sunxi-ehci <6>[ 14.910627] generic-usb 0003:1C4F:0048.0008: input,hidraw0: USB HID v1.10 Mouse [SIGMACHIP Usb Mouse] on usb-sunxi-ehci-1.2/input0 <6>[ 28.371552] notice: set wl_reg_on 0 to power on 8723au in sun8iw7p1! <6>[ 28.597592] init: no such service 'fuse_usbhost/Storage03' <6>[ 28.792258] rtk_btusb: ===================hci_register_dev success <6>[ 31.131081] init: sys_prop: permission denied uid:1003 name:service.bootanim.exit root@dolphin-fvd-p3:/ #